MechaTronix is keen on developing situation specific LED coolers per LED brand, and offers in this way an optimal performance which exceeds existing cooling platforms with over 30%. As an example they launch now the LPF67 and LPF86 advanced pin fin coolers. In a diameter of 67mm and 86 mm, these advanced LED coolers keep respectively 3500 lumen and 4500 lumen spot and track lights on the required case and junction temperature even under a full horizontal 90 degrees positioning.
The LPF47 and LPF67 advanced LED pin fin coolers are standard foreseen from Zhaga book 3 and Zhaga book 11 mounting holes, as well as an advanced pattern for direct mounting of COB LED modules. Besides better performance under tilted position the weight of these LED pin fin coolers is far lower than extruded star shaped LED coolers with similar performance. The diameter of 86 mm was typically chosen during development to create a 3000 to 4500 lumen passive replacement for tilted active cooled track and spot lights from the past. A few months ago MechaTronix launched a similar diameter 86 mm star shaped LED cooler, the ModuLED Micro, for similar replacement of active cooled spot and down lights under vertical position. Now with this next generation pin fin cooler it seems active cooling is completely banned in spot and down light applications.
About MechaTronix Kaohsiung Co, Ltd:
MechaTronix Kaohsiung Co, Ltd was set up in 2007 in Southern Taiwan’s Kaohsiung as a holding with 3 share holders grouping 5 existing mechanical parts manufacturers with the same end market but different production processes.
All of the 5 manufacturing plants where over 10 years in operation and focussed on the overseas OEM market.
via LED-professional http://ift.tt/1LyzpjI